Determine which of the following are tensors on $\mathbb{R}^4$, and express those in terms of elementary tensors $$f(x,y,z) = 3x_1y_2z_3 - x_3 y_1 z_4.$$

The solution say

enter image description here

My questions

  1. What does tensors on $\mathbb{R}^4$ mean? It means it takes on a vector with four components in real-valued right? But my function has $9$ variables, namely $f(x_1,x_2,x_3,y_1,y_2,z_1,z_2,z_3,z_4)$. Unless it actually has $12$ variables, $f(x_1,x_2,x_3,x_4,y_1,y_2, y_3, y_4,z_1,z_2,z_3,z_4).$

  2. Here is my work trying to verify the elementary tensor product is correct. I know that $$\omega^i (\mathbf{v}) = v_i$$

\begin{align} f(x_1,x_2,x_3,x_4,y_1,y_2, y_3, y_4,z_1,z_2,z_3,z_4). &= (3\omega^1 \otimes \omega^2 \otimes \omega^3 - \omega^3 \otimes\omega^1 \otimes\omega^4 )(x_1,x_2,x_3,x_4,y_1,y_2, y_3, y_4,z_1,z_2,z_3,z_4).\\ &=3\omega^1 (\mathbf{x,y,z}) \omega^2(\mathbf{x,y,z}) \omega^3((\mathbf{x,y,z}) - \omega^3 (\mathbf{x,y,z}) \omega^1(\mathbf{x,y,z}) \omega^4(\mathbf{x,y,z}) \end{align}

If I work backwards I can figure out what the pattern looks like. But I don't understand why once we evaluate $\omega^1$ on $\mathbf{x}$, the $\omega^2$ that comes after evaluates on $\mathbf{y}$?

I am very new to this. My book doesn't define nor explain what it means to evaluate on two vectors. I don't even know what is the order of the tensors $\omega^i$s.

  • $\begingroup$ Curiosity: what book are you using? I will begin to study this subject soon. Thank you (: $\endgroup$ – Ivo Terek May 31 '14 at 2:38
  • $\begingroup$ Right now, I am looking at Munkres. $\endgroup$ – Hawk May 31 '14 at 3:15

O.K, here is a better answer; I think the other answer is also informative ( actually, I put in a lot of time into writing it , so I don't want to delete it :) ):

1) A tensor f in $\mathbb R^4$ is a function defined on $\mathbb R^4 $ that is linear on each variable separately, i.e., f is linear in each variable when other variables are held constant. In our case, the variables in $\mathbb R^4$ are $x=(x_1,x_2,..,x_4),...,z= (z_1, z_2, z_3, z_4)$. I think what is confusing is the way the function is expressed, as if it was a function defined on $\mathbb R^9$ , or so. I think this can be remedied by using the projection maps $\pi_j ; j=1,2,3,4$, with $\pi_j(x):=x_j$. Then the map $$ f(x,y,z)=3x_1y_2z_3 -x_3y_1z_4$$ , can be written in terms of $(x,y,z)$ alone (as f(x,y,z) ought to, since by definition it only depends on these 3 variables ) by $$f(x,y,z) = 3\pi_1(x)\pi_2(y)\pi_3(z)-\pi_3(x)\pi_1(y)\pi_4(z)$$.

This is a (composite) function of the three variables $(x,y,z)$ , just like, say , $cosx^2+tany$ is a function of two variables.

We know check that this f is a tensor, i.e., that f is linear on each of the variables $(x,y,z)$ ( notice $f$ is defined on a subspace of $\mathbb R^4$ consisting of the first 3 axes.). So we need to check, for all constants $c,d,k$ :

i ) $f(cx,y,z)=cf(x,y,z); f(x,dy,z)=df(x,y,z); f(x,y, kz)=kf(x,y,z)$.

Let me just do the part for $x$; the rest will likely be clear (let's forget the issue with the projections for now ):

$$f(cx,y,z):=f((cx_1,cx_2, cx_3, cx_4),(y_1,..,y_4),(z_1,..,z_4)=3(c_1)y_2 z_3-(cx_3)y_1z_4=c(x_1y_2z_3-x_3y_1z_4)=cf(x,y,z)$$

Now we need to check, for $x'=(x_1',x_2', x_3', x_4')$:

ii)$$ f(x+x',y,z)=f(x,y,z)+f(x',y,z) $$ (same for the $y,z $ variables). We have:

$$ f(x+x',y,z)=3(x_1+x_1')y_2z_3-(x_3+x_3')y_1z_4=3x_1y_2z_3+ 3x_1'y_2z_3 -(x_3y_1z_4)-(x_3')y_1z_4 $$ , which you can verify equals $f(x,y,z)+f(x',y,z)$ . A similar argument shows $f$ is linear with respect to $y,z$.

Now, to verify the correctness of the representation: $$3w^1 \otimes w^2 \otimes w^3 -w^3 \otimes w^1 \otimes w^4 :$$ , using the definition $w^i(e_j)= \delta_i^j$ , where $e_i$ ; i=1,2,3,4 is the "standard" basis $e_1=(1,0,0,0),..,e_4=(0,0,0,1)$.

In this basis, a point $x=(x_1,x_2,x_3, x_4)$ has a representation $$x_1e_1+x_2e_2+x_3e_3+x_4e_4 $$ . Also, the tensor operation $w^i \otimes w^j \otimes w^k$ is defined by $$w^i \otimes w^j \otimes w^k (a,b,c):=w^i(a)w^j(b)w^k(c) $$ , where $a,b,c$ are vectors.

We then have :

$$ 3w^1 \otimes w^2 \otimes w^3 ((x_1e_1+...x_4e_4),...,(z_1e_1,...,z_4e_4)=3w^1(x_1e_1,..x_4e_4)\otimes w^2(y_1e_1,..,y_4e_4) \otimes w^3(z_1e_1,..,z_4e_4)=3x_1y_2z_3 $$ . Try verifying the other component $w^3 \otimes w^1 \otimes w^4 $.

Hope that was helpful.

| cite | improve this answer | |
  • $\begingroup$ I think you mean a subset of $\mathbb{R}^4$, not a subspace. Also how do we know (my book has a proof about this, but they didn't explain how they came up with this definition) $$w^i \otimes w^j \otimes w^k (a,b,c):=w^i(a)w^j(b)w^k©$$ $\endgroup$ – Hawk May 31 '14 at 8:14
  • $\begingroup$ If you refer to $(x,y,z,0) \subset \mathbb R^4$ , this is a subspace. In my understanding, the formula you ask about is a definition. $\endgroup$ – user99680 May 31 '14 at 8:21
  • $\begingroup$ @sidht: Maybe this is the answer you wanted: we are working with the tensor algebra of $V$. We know by construction that the tensor product of a k-tensor and an n-tensor is a (k+n)-tensor. We then extend by linearity: en.wikipedia.org/wiki/Tensor_algebra $\endgroup$ – user99680 May 31 '14 at 19:06
  • $\begingroup$ @sidht: Maybe more elementarily, k-tensors act on k-vectors, by construction. In this case, the $w^k's$ are 1-tensors, so the act on vectors. Each of $w^i, w^j, w^k $ are 1-tensors, and so each acts on the vectors, or "1-vectors" a,b,c. ^ $\endgroup$ – user99680 Jun 2 '14 at 0:37

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.