4
$\begingroup$

The tetrahedron can be written with its apex at the north pole of a sphere with the four vertices: \begin{eqnarray} a(0,0,\sqrt{6}/4) \; , \; a(\sqrt{3}/3, 0, -\sqrt{6}/12) \; , \; a(-\sqrt{3}/6, 1/2, -\sqrt{6}/12) \; , \; a(-\sqrt{3}/6, -1/2, -\sqrt{6}/12) \end{eqnarray} where $a$ is the side of length of the tetrahedron. This can be shown using Pythagoras theorem but the reader can verify these equations in the wolfram website

It is also known that the tetrahedron can be found by using the alternating cube. That is choosing every other vertex (that is no two-consecutive vertices) of a cube. In this case the vertices are simple:

\begin{eqnarray} (1,1,1) \; , \; (1,−1,−1) \; , \; (−1,1,−1) \; , \; (−1,−1,1) \end{eqnarray}

For this you can check the Wikipedia website.

Up to a normalization factor (so that we can plot both tetrahedra in the same sphere of radius $R$) we should be able to map one into the other with a simple (or two) rotations.

We could set up a system of equations with unknowns such that three of the vertices on one tetrahedron are mapped into three of the vertices of another tetrahedron and find a rotation matrix, or after normalizing, find the director cosines (dot product of normal vectors between each pair of vectors, where pair means one from one tetrahedron and another from the other).

The question is: Is there a product of 1, 2 or even 3 elementary rotation matrices that will take me from one tetrahedron to the other? By elementary rotation matrix I mean any of these three: \begin{equation} \left ( \begin{array}{ccc} 1 & 0 & 0 \\ 0 & \cos \theta & - \sin \theta \\ 0 & \sin \theta & \cos \theta \end{array} \right ) \end{equation}

\begin{equation} \left ( \begin{array}{ccc} \cos \alpha & -\sin \alpha & 0 \\ \sin \alpha & \cos \alpha & 0 \\ 0 & 0 & 1 \end{array} \right ) \end{equation}

or

\begin{equation} \left ( \begin{array}{ccc} \cos \gamma & 0 & -\sin \gamma \\ 0 & 1 & 0 \\ \sin \gamma & 0 & \cos \gamma \end{array} \right ) \end{equation}

enter image description here

Thanks.

$\endgroup$
  • 1
    $\begingroup$ Isn't it just a matter of rotating the positive $z$-axis to line up with the "all $1$'s" vector? $\endgroup$ – pjs36 Dec 1 '15 at 17:18
  • 1
    $\begingroup$ @pjs36 I thought that. I tried that yesterday and it did not work. Actually I need to first rotate the $XY$ plane (using the $Z$ axis as the axis of rotation) until I fix the bottom three vertices to the corners of the cube. Then rotate the $Z$ axis as you indicated here. I will try that. I am still not certain of this argument. Thanks. $\endgroup$ – Herman Jaramillo Dec 1 '15 at 17:20
  • $\begingroup$ @pjs36 : I think your comment is interesting. Please observe this post: math.stackexchange.com/questions/180418/… . At the end I ask if there is a method to find deterministic method to find just one matrix that do the job. This would be nice. Thanks. $\endgroup$ – Herman Jaramillo Dec 5 '15 at 20:58
3
$\begingroup$

In the stereogram below, rotate the (red) tetrahedron "clockwise" about the $y$-axis by an angle $\gamma = \arctan(\sqrt{2})$ to bring the vertices in the $(x, z$)-plane to the same $z$-height (blue), then rotate about the $z$-axis by $\alpha = \pm\pi/4$ to bring the vertices of the tetrahedron to alternating vertices of a cube (green).

Rotating a tetrahedron about the coordinate axes

$\endgroup$
  • $\begingroup$ Very smart! I could do it using three rotations, because I was choosing my rotations poorly. $\endgroup$ – pjs36 Dec 2 '15 at 16:58
1
$\begingroup$

Two solutions presented: First is an analytical derivation, the second is a solution found by using computer software (symbolic "Maxima" and graph "TiKz") by trial and error.

1.For simplification let us call the three vertices in the base of the tetrahedron \begin{eqnarray*} T_1 &=& a (\sqrt{3}/3, 0, -\sqrt{6}/12) \\ T_2 &=& a (-\sqrt{3}/6, 1/2, -\sqrt{6}/12) \\ T_3 &=& a (-\sqrt{3}/6, -1/2, -\sqrt{6}/12) \end{eqnarray*} and the apex $a(0,0,\sqrt(6)/4)$. We choose $a=2 \sqrt{2}$ so that each vector cas norm $\sqrt{3}$.

\begin{eqnarray*} T_1 &=& (2 \sqrt{6}/3, 0, - \sqrt{3}/3) \\ T_2 &=& (-\sqrt{6}/3, \sqrt{2}, - \sqrt{3}/3) \\ T_3 &=& a (-\sqrt{6}/3, -\sqrt{2}, -\sqrt{3}/3) \\ A &=& (0,0,\sqrt{3}) \end{eqnarray*}

We want to set up equations to find the azimuth and polar angles in spherical coordinates. We want to make a solid rotation. Starting at the north pole $A$ we should rotate this vector as to align with one of the vectors in the cube. The closest point to $A$ in the cube with coordinates at $\pm 1$ is $A'= (-1,-1,1)$. So we want to make a solid rotation from $A$ to $A'$.

We find first the polar and azimuthal angles for these two points, with the radius $r=\sqrt{3}$. \begin{eqnarray*} \left ( \begin{array}{c} 0 \\ 0 \\ \sqrt{3} \end{array} \right ) = \left ( \begin{array}{c} \sqrt{3} \sin \phi_A \cos \theta_A \\ \sqrt{3} \sin \phi_A \sin \theta_A \\ \sqrt{3} \cos \phi_A \end{array} \right ) \end{eqnarray*} From the last equation we find \begin{equation} \cos \phi_A = 1 \quad , \quad \sin \phi_A = 0 \end{equation} At this moment we can not determine the azimuthal angle $\theta_A$. We can assume $\theta_A=0$ and this does not violate any of the equations above, and the pair \begin{eqnarray*} \sin \theta_A = 0 \quad \cos \theta_A = \pm 1 \end{eqnarray*} We choose the positive sign $\cos \theta = 1$.

Now, if we want to map this point into $(-1,-1,1)$ we need to set up the equation

\begin{eqnarray*} \left ( \begin{array}{c} -1 \\ -1 \\ 1 \end{array} \right ) = \left ( \begin{array}{c} \sqrt{3} \sin \phi_{A'} \cos \theta_{A'} \\ \sqrt{3} \sin \phi_{A'} \sin \theta_{A'} \\ \sqrt{3} \cos \phi_{A'} \end{array} \right ) \end{eqnarray*} We find from the third equation, \begin{eqnarray*} \cos \phi_{A'}=\frac{\sqrt{3}}{3} \quad , \quad \sin \phi_{A'} = \pm \sqrt{1 -1/3}=\pm \frac{\sqrt{6}}{3} \end{eqnarray*}

From the first equation

\begin{eqnarray*} -1 = \left ( \sqrt{3} \right ) \left ( \pm \frac{\sqrt{6}}{3} \right ) \cos \theta_{A'} = \pm \sqrt{2} \cos \theta_{A'} \end{eqnarray*} If we choose the ``$-$'' sign then $\sin \phi_{A'}$ should (because the first component is negative) be positive. So let us pick \begin{eqnarray*} \cos \theta_{A'}= \frac{\sqrt{2}}{2} = \sin \theta_{A'} \quad , \quad \sin \phi_{A'} = -\frac{\sqrt{6}}{3} \end{eqnarray*} We found the following convenient equations \begin{eqnarray*} \cos \phi_A &=& 1 \quad , \quad \sin \phi_A = 0 \\ \cos \phi_{A'} &=& \frac{\sqrt{3}}{3} \quad , \quad \sin \phi_{A'} = -\frac{\sqrt{6}}{3} \\ \cos \theta_A &=& 1 \quad , \quad \sin \theta_A = 0 \\ \cos \theta_{A'} &=& \frac{\sqrt{2}}{2} \quad , \quad \sin \theta_{A'} = \frac{\sqrt{2}}{2} \\ \end{eqnarray*} which we use to find the following required trigonometric equations for the rotation.

The rotation needed to go from $A$ to $(-1,-1,1)$ in the polar direction has the two following basic trigonometric functions:

\begin{eqnarray*} \cos (\theta_{A'}-\theta_A) &=& \cos \theta_{A'} \cos \theta_A + \sin \theta_{A'} \sin \theta_A = \frac{\sqrt{2}}{2} + 0 = \frac{\sqrt{2}}{2} \\ \sin ( \theta_{A'}-\theta_A) &=& \sin \theta_A' \cos \theta_A - \sin \theta_A \cos \theta_{A'} = \frac{\sqrt{2}}{2} - 0 = \frac{\sqrt{2}}{2}. \end{eqnarray*} We call $\theta=\theta_{A'} - \theta_A$ the total rotation polar angle between the point $T_1$ and $(1,-1,-1)$.

Now for the azimuthal rotation. \begin{eqnarray*} \cos(\phi_{A'}-\phi_A) &=& \cos \phi_{A'} \cos \phi_A + \sin \phi_{A'}\sin \phi_A = \frac{\sqrt{3}}{3} \end{eqnarray*} and \begin{eqnarray*} \sin( \phi_{A'}-\phi_A)= \sin \phi_{A'} \cos \phi_A - \sin \phi_A \cos \phi_{A'} = -\frac{\sqrt{6}}{3} + 0 = -\frac{\sqrt{6}}{3} \end{eqnarray*} from which \begin{eqnarray*} \sin( \phi_{A'}-\phi_A)= -\frac{\sqrt{6}}{3} \end{eqnarray*} We call $\phi=\phi_{A'} - \phi_A$.

We are ready to make the rotations needed. The azimuthal rotation is done with respect to the $z$ axis. This is

\begin{equation} Az = \left ( \begin{array}{ccc} \cos \theta & -\sin \theta & 0 \\ \sin \theta & \cos \theta & 0 \\ 0 & 0 & 1 \end{array} \right ) =\left ( \begin{array}{ccc} \frac{\sqrt{2}}{2} & -\frac{\sqrt{2}}{2} & 0 \\ \frac{\sqrt{2}}{2} & \frac{\sqrt{2}}{2} & 0 \\ 0 & 0 & 1 \end{array} \right ) \end{equation} Which we identify as a $\pi/4=45^{\circ}$ rotation of the $XY$ plane with respect to the $Z$ axis.

The polar rotation with respect to the $Y$ axis in the counter-clockwise direction is given by \begin{eqnarray} P = \left ( \begin{array}{ccc} \cos \phi & 0 & \sin \phi \\ 0 & 1 & 0 \\ -\sin \phi & 0 & \cos \phi \end{array} \right ) = \left ( \begin{array}{ccc} \frac{\sqrt{3}}{3} & 0 & -\frac{\sqrt{6}}{3} \\ 0 & 1 & 0 \\ \frac{\sqrt{6}}{3} & 0 & \frac{ \sqrt{3}}{3} \end{array} \right ) \end{eqnarray}

The matrices found above produce the proper rotation.

  1. Most of this exercise here was done by trial and error.

    First we want to bring all vectors to the same size ($\sqrt{3}$). This is done by choosing $a=2 \sqrt{2}$ (the side length) .

    Then we call the matrix that rotates $\pi/4$ around the $z$ axis, $Y$ (for yaw):

    \begin{eqnarray} Y = \left ( \begin{array}{ccc} \cos \alpha & -\sin \alpha & 0 \\ \sin \alpha & \cos \alpha & 0 \\ 0 & 0 & 1 \end{array} \right ) = \left ( \begin{array}{ccc} \frac{\sqrt{2}}{2} & -\frac{\sqrt{2}}{2} & 0 \\ \frac{\sqrt{2}}{2} & \frac{\sqrt{2}}{2} & 0 \\ 0 & 0 & 1 \end{array} \right ) \end{eqnarray}

    Then the matrix which rotates around the $y$ axis: $P$ (for pitch) with an angle of $\theta = \arccos(\sqrt{3}/3)$ which is about $54^{\circ}$ : This is: \begin{eqnarray} P = \left ( \begin{array}{ccc} \cos \theta & 0 & -\sin \theta \\ 0 & 1 & 0 \\ \sin \theta & 0 & \cos \theta \end{array} \right ) = \left ( \begin{array}{ccc} \frac{\sqrt{3}}{3} & 0 & -\frac{\sqrt{2}}{\sqrt{3}} \\ 0 & 1 & 0 \\ \frac{\sqrt{2}}{\sqrt{3}} & 0 & \frac{\sqrt{3}}{3} \\ \end{array} \right ) \end{eqnarray}

    Then we can verify by matrix multiplication that if we call the base vectors

    \begin{eqnarray} T_1 &=& a (\sqrt{3}/3, 0, -\sqrt{6}/12) \\ T_2 &=& a (-\sqrt{3}/6, 1/2, -\sqrt{6}/12) \\ T_3 &=& a (-\sqrt{3}/6, -1/2, -\sqrt{6}/12) \end{eqnarray} Then: $ Y P T_1 = (1,1,1)$, $YPT_2=(-1,1,-1)$, $YPT_3=(1,-1,-1)$, and finally for the apex $A=(0,0,a \sqrt(6)/4)$, $Y P A = (-1,-1,1)$.

    I used Maxima to validate my computations. I also used TiKZ to draw and test the transformations. I did 4 plots, three of the plots where the projections into the $XY$, $XZ$, and $YZ$ axis (because the optical illusions from seeing a 3D figure in a 2D screen). The other figure was a perspective in 3D which is the only one that I include here.

    Rotation of a tetrahedron

    The figure on the right has the rotated (blue) into (brown) on top of the (red) diagonals of the cube. The blue dots in the second figure are smaller to see how the overlay is doing the job.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.