Take the 2-minute tour ×
Mathematics Stack Exchange is a question and answer site for people studying math at any level and professionals in related fields. It's 100% free, no registration required.

I'm having trouble filling the steps in this guided proof of Riesz's representation theorem. (I already have a proof I can understand, but I'd like to understand this one too.)

Let $H$ be a Hilbert space, and $\varphi : H \to \mathbb{C}$ a bounded linear functional. If $\varphi = 0$ then we are done; otherwise, by scaling, we may assume without loss of generality that $\| \varphi \| = 1$. So, for each $n$, there is a unit vector $h_n$ in $H$ such that $| \varphi(h_n) | > 1 - \frac{1}{n}$. By multiplying each one by an appropriate complex number of unit modulus, we may assume $\varphi(h_n) \in \mathbb{R}$ and $\varphi(h_n) > 1 - \frac{1}{n}$.

Now I run into a problem — I can see that everything follows from the first step, but the first step is eluding me at the moment.

  1. $h_n \longrightarrow h$ for some $h$ in $H$. Why? If $H$ is finite-dimensional then certainly there is a convergent subsequence, but I don't see how we can assert the existence of such an $h$ without knowing more about the relative distances of the $h_n$.

  2. $h$ is orthogonal to the kernel of $\varphi$. I think the idea here is to show that $\| h - u \|$ is minimised over $u \in \ker \varphi$ when $u = 0$, by exploiting the fact that $\| h - u \| \ge | \varphi(h - u) | = | \varphi(h) | = 1$.

  3. $\ker \varphi \oplus \operatorname{span} \{ h \} = H$, by e.g. rank–nullity or orthogonal decomposition.

  4. Hence $\varphi(x) = \langle x, h \rangle$ for all $x \in H$, by decomposing $x$ using the above decomposition of $H$ and linearity.

share|improve this question
add comment

2 Answers

up vote 11 down vote accepted

Note that for $n,m \geq N$ we have $\varphi(h_n + h_m) \gt 2 (1-\frac{1}{N})$ (assuming that $h_n$ is modified by multiplying with an appropriate scalar as you indicated). By the parallelogram law we then have $$4 = 2\|h_n\|^2 + 2\|h_m\|^2 = \|h_n + h_m\|^2 + \|h_n - h_m\|^2 \geq (\varphi(h_n + h_m))^2 + \|h_n - h_m\|^2$$

Thus, $\|h_n - h_m\|^2 \lt 4 - 4 (1-\frac{1}{N})^2$ and we see that $(h_n)$ is Cauchy.


Added. I agree with Mark's assessment that the outlined proof is a bit convoluted (it needs some useful techniques in Hilbert space geometry, though).

The full version of the Riesz representation theorem can be proved in a few lines:

The map $\Phi: H \to H^{\ast}$ given by $y \mapsto \langle \cdot, y\rangle$ is a conjugate linear isometric isomorphism.

By Cauchy-Schwarz $\|\Phi(y)\| \leq \|y\|$. Since $\|y\|^2 = \langle y,y \rangle = [\Phi(y)](y)$ we have equality, hence $\Phi$ is isometric. Thus, the only point that deserves elaboration is the fact that $\Phi$ is onto. If $\varphi \neq 0$, choose $y' \perp \ker{\varphi}$ with $\varphi(y') = 1$ (this $y'$ exists and is unique because of the orthogonal decomposition $H = \mathbb{C} \oplus \ker{\varphi}$, as $\varphi \neq 0$). Clearly $x - \varphi(x)y' \in \ker{\varphi}$ and thus the computation $\langle x, y' \rangle = \langle x - \varphi(x)y',y'\rangle + \langle \varphi(x) y', y'\rangle = \varphi(x) \|y'\|^2$ shows that $y = \frac{y'}{\|y'\|^2}$ is the unique $y \in H$ such that $\varphi = \Phi(y)$.

share|improve this answer
1  
I just checked in Pedersen's Analysis Now (3.1.9) and remarked that the argument above is suspiciously close to his. I must have memorized it well :) –  t.b. Jun 4 '11 at 18:24
add comment

Here's another proof of the Riesz representation theorem. This isn't what you asked for, but the proof you give seems terribly intricate to me and not as intuitive as one would like.

We start with some continuous linear functional $\phi \in H^*$. We want to show that $\phi = \phi_y$ for some $y \in H$, where $\phi_y$ is defined by $\phi_y (x) = <x,y>$. It is very easy to see that such a $y$ is determined uniquely, so the big question is what is the $y$ that corresponds to $\phi$? If we already knew that $\phi$ was of the above form, could we extract the vector $y$ from it without knowing it a-priori? Well, $y$ will satisfy $\phi(y) \ge 0$ (since this should give the norm of $y$ squared), but this doesn't help us much, as there are definitely many vectors in $H$ for which $\phi$ will give non-negative real values (unless $\phi = 0$, which is a trivial case). So a different approach is needed.

We may try to get our $y$ as the result of evaluating $\phi$ at some point in $H$. But $\phi$ spits out scalars, not vectors! So we can't do that either. Nevertheless, we shouldn't dismiss this approach entirely. Instead, let us think: is there some way we can specify a vector in $H$ by using a scalar, or several scalars? In finite dimension, the answer is an obvious yes: we choose some basis to the space and then every vector is specified by a unique tuple of scalars (its coordinates in the basis). But Hilbert spaces have a concept of basis too - an orthonormal basis! If we fix some orthonormal basis $e_1,e_2,\dots$ of $H$ (let's assume $H$ to be separable, just for the sake of nice notation) then every vector $x$ in $H$ is specified by the sequence of scalars $<x,e_n>$, for $x=\sum_{n=1}^{\infty} <x,e_n>e_n$. So if we find the scalars $<y,e_n>$ for all $n \in \mathbb{N}$, we also find $y$. But given the functional $\phi_y$ these scalars can be computed by its very definition, just by evaluating it at the basis elements (and conjugating).

Specifically, if we knew that $\phi = \phi_y$ for a specific vector $y \in H$, then we would have $\phi (e_n) = \phi_y (e_n) = <e_n,y>=\overline{<y,e_n>}$ for all $n \ge 1$, or equivalently $<y,e_n> = \overline{\phi(e_n)}$ for all $n$. But this expresses the scalars $<y,e_n>$ in a way which depends only on $\phi$, so by uniqueness, the coordinates of the $y$ which we are looking for are simply $\overline{\phi(e_n)}$! Thus the required $y$ is the vector $\sum_{n=1}^{\infty} \overline{\phi(e_n)}e_n$. It only remains to show that this vector indeed satisfies $\phi = \phi_y$. Since $e_1,e_2,\dots$ is an orthonormal basis and $\phi$ is a continuous linear functional, it suffices to show that both functionals give the same value on the basis elements. And indeed, for every $m$, $\phi_y (e_m) = <e_m,y> = \sum_{n=1}^{\infty} <e_m,\overline{\phi(e_n)}e_n> = \sum_{n=1}^{\infty} \phi(e_n)<e_m,e_n> = \phi(e_m)$ by orthogonality.

share|improve this answer
3  
@Mark: One can actually do without using a basis whatsoever (a proof is in Rudin's 'Real and Complex Analysis' for example): Let $M = \{x| \phi(x) = 0\}$. If $\phi\ne 0$, then there is a $z \perp M$ with $\|z\| = 1$. But then $\phi(x) = \phi(x)\langle z , z\rangle = \langle \phi(x) z, z\rangle = \langle \phi(z)x, z\rangle$ (note that $\phi(x)z - \phi(z)x \in M$). Therefore $y = \overline{\phi(z)}z$ is our choice. –  Sam Jun 4 '11 at 15:50
    
I gave +1 for the effort and the good motivation. But I agree with @Sam that the base-free proof is much shorter, simpler and cleaner. I'd add that this proof makes the Riesz representation theorem geometrically obvious. Also, for me it is not quite clear from your exposition why the a priori formal sum $\sum \overline{\phi(e_n)}e_n$ actually belongs to $H$. –  t.b. Jun 4 '11 at 16:58
    
I think both proofs are about the same length and complexity ("my" proof can be written in just a few lines, I simply tried to motivate it a bit). As for the base thingy, well, here you have to choose an orthobasis, while in "your" proof you have to choose some vector. So both proofs require some arbitrary choice, but many Hilbert spaces come a-priori with a natural orthobase, and then the above proof gives a recipe for finding the vector which represents $\phi$ in a fairly natural way. –  Mark Jun 4 '11 at 18:12
    
As for the sum thing, you're definitely right. There are several ways in which what can address this, but indeed this makes the proof a bit messier. –  Mark Jun 4 '11 at 18:23
    
Well, no major disagreement about the level of complexity of the two proofs, but I try to avoid "coordinates" whenever possible and that's certainly a matter of taste. As I said maybe not clearly enough, I like the motivation! (By the way: if you add @username to your comments then user username gets notified - the first three letters of the username suffice in fact, but only one user per comment can be "pinged" - besides the "owner" of the comment thread. More info here and the links there) –  t.b. Jun 4 '11 at 18:40
show 1 more comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.