Take the 2-minute tour ×
Mathematics Stack Exchange is a question and answer site for people studying math at any level and professionals in related fields. It's 100% free, no registration required.

Tessellation is fascinating to me, and I've always been amazed by the drawings of M.C.Escher, particularly interesting to me, is how he would've gone about calculating tessellating shapes.

In my spare time, I'm playing a lot with a series of patterns which use a hexagonal grid, and a tessellating design I saw on a chair in my dentists surgery.

Here's some examples of patterns I've worked up...

Because I don't really understand the math, I've had to create the basic unit shape by hand, I can see the 60/120 degree angles well enough, but I really want to figure out the proportions of the shape, which appear (from just looking) to be tightly interrelated.

A few observations I've made during this process (aside from it being a bit more tricky than I first imagined.)

There appears to be a equilateral triangle which contains the key dimensions, and of course the regular hexagon is important, since this essentially forms 2 interwoven hexagonal grids.

Beyond this I'm unable to express mathematically what is going on. Key things I'd like to learn are...

  • How to calculate the relative positions of each shape to build the grid programmatically.
  • How to construct the shape unit mathematically.

I know that this doesn't help too much in understanding less rigid tessellation designs, such as Escher's reptiles, which I assume MCE made intuitively (I read that he wasn't a mathematician, which I was surprised by.)

Anyway, I hope this question isn't too sprawling, and thank you for looking.

Additional notes on the origin of this pattern.

Previously I'd said, (I believe the pattern is pretty old and of Chinese origin.).

However, this statement was pure speculation based on the appearance of similar patterns in Chinese art, also using the p31m wallpaper tiling method, this one below for example..

Well, it turns out that this specific pattern:

Appears originally in Islamic / Arabic / Moorish art. Within the confines of my limited research, it seems that geometric designs in Islamic art hold no specific religious significance (I expect this is a highly controversial statement.) and instead provide an opportunity for craftsmen to demonstrate the skill and subtlety of their workmanship, and to dazzle and intrigue the viewer with their complexity.

It seems that using circle construction of a grid of equilateral triangles, this pattern can be discovered, along with numerous variations, eg:

Hex tile constructed from triangle grid

Circles to equilateral triangle grid, to repeating pattern discovery

After working with this and other Islamic patterns I find that this not only applies to the viewer, but very much with the artist. Every time I begin working with these patterns I'm consistently amazed by them.

Islamic Geometric Art

Apparently Keith Critchlow an artist, lecturer, author, and professor of architecture, has made extensive studies in Islamic architecture, arts and decoration, and I've ordered a couple of books written by him, Order in Space and Islamic Patterns: An Analytical and Cosmological Approach, to further my own education on this topic. (I should note that Critchlow received high praise from Buckminster Fuller, who commented on his genius. Personally, as a long time acolyte of Fuller, I'm very intrigued to see Professor Critchlow's books.)

New York Metropolitan Museum of Art provides this PDF book for free download...

Animated Construction

Hexagonal Tessellation Construction (draft) from ocodo on Vimeo.

Click the image to watch...

Update

So I discovered through pencil/compass construction that the base unit is 1/8th of the radius of the initial construction circle (i.e. the length of one side of the hexagon.)

The width of the struts are 1/4 (or 2 base units)

I'm pushed for time to get this done tonight so I'm just posting progress as I work things out... (and noting where I make mistakes)

Construction:

construction grid

Here is the construction mapped to the the 31m wallpaper group...

(handily iPhone4 wallpaper sized... well, the link through is.)

Gallery.

I've added a Flickr set to post various designs on the hexagonal lattice theme, take a look.

Interactive pattern generators

I've made some processing sketches which you might like to see, they generate patterns like this...

and this...

(They have some keyboard controls to tame the randomness a bit.)

3D / Blender experiments.

I have these shapes being 3D printed, I'll post a report when I get them in the mail (will be about 10 days) (I used Shapeways.com who print 3D objects in plastic, metal and other assorted materials.)

The intention with this set of 7 is to assemble them, and frame them nicely. I also get to test the precision of the 3D print material.

3D prints arrive.

Due to my inexperience with solid manufacture, I completely overlooked the need to allow for manufacturing/material tolerance. After a brief study on this aspect I'm remodelling my figures to add this in. However I need to fabricate a few sets to test optimal tolerance.

Anyway, this is what I've got back from shapeways, (nb: they use UPS shipping, included in the cost and the items are packaged very well, there is no risk of breakage.)

When I get the tolerance right I'll post again.

By the way, I found a very cool feature in CARMetal, (the software I've used to do the geometric construction.) I can add controls like sliders and text inputs that affect dimensions. For example, I create a slider t (tolerance) and can then apply t to the radius of my tolerance circles, which I use subsequently to construct the line segments which make up the adjusted shape, these all stay in sync with the slider value.

It's probably easier to see it, the tolerance is marked green (way too much in this example.)

Hand sanded

Clay tiles...

Tiles made with Sculpey medium

Well, not actually clay, I've used Sculpey, and pressed the tiles out using these tile cutters, which were 3D printed by Shapeways.

Tile molds

Additional notes...

(These are mostly for my reference, I'm summarising, but please feel free to correct me where I've gone wrong, it would be a big help.)

In addition to the p31m symmetry, there's an interesting relationship within the shape dimensions. The struts are of course all of equal width, and obviously all the angles are multiples of $60^\circ$. I've noted before, that the strut width is one quarter of the construction radius ( $w = \frac{r}{4}$ or as shown below, $2u$.) To calculate all required measurements we need to use the base unit $u = \frac{r}{8}$. The distance between the centres of each shape is $9u$. The length of a edge of the exterior arrow head (and of course it's corresponding interior edge) is $5u$. The remaining dimensions are the interior lengths of the arrow head, which are both $2u$ (of course, these interlock with each other.)

Another minor update

I found some interesting information in this article (and page 2) on Islamic art.

I also took a photo of the chair in my dentists surgery, which began this little study of mine.

enter image description here

share|improve this question
2  
Many people have told you already how great these pictures/photos/movies are, but still, I wanted to express my appreciation. Plain and simply: I love them. –  t.b. Jun 27 '11 at 0:11
6  
Awesome question and even more awesome pictures - –  Leonardo Fontoura Jun 27 '11 at 1:43
7  
You should do this in a blog, I think. –  Mariano Suárez-Alvarez Nov 9 '11 at 2:55
1  
Since this is pinged to the front page, here is a talk which has a lot of neat info about Penrose Tilings and Islamic Art and Girih tiles. –  user13838 Nov 9 '11 at 3:02
2  
I appreciate the amount of effort and time that went into this, but please note that your question is now a) way too long, b) mostly unrelated to your actual query, c) prefaced and appendixed with material that keeps users from getting to the answers. In short, all of the additional material is unsuited to a QA platform. In the future, please try to limit the question body to your actual question. I agree with @MarianoSuárez-Alvarez, in that this content would make for a very interesting blog. –  Asad Oct 11 '13 at 19:42

3 Answers 3

up vote 45 down vote accepted

What's going on is a little group theory, specifically the study of wallpaper groups. The best introduction I know to this subject (that specifically cares about tessellations and is written for non-mathematicians) is Conway, Burgiel, and Goodman-Strauss's The Symmetries of Things. There are diagrams in the latter book which should be quite helpful.

As far as calculating positions, I guess for starters you're asking for the coordinates of the points on a hexagonal lattice. These are exactly the points

$$\left( n + \frac{m}{2}, \frac{ \sqrt{3}}{2} m \right)$$

where $m, n$ are integers. This is a fairly straightforward calculation using the side lengths of a 30-60-90 triangle (half of an equilateral triangle), which can be deduced, for example, using the Pythagorean theorem.

share|improve this answer
7  
A second recommendation for The Symmetries of Things. Excellent. –  Ross Millikan May 4 '11 at 1:53
    
Thank you, I've learned a lot, However, I'd still like to know how I could describe the unit shape itself mathematically, for example are there some key ratios or dimension at play here? –  Slomojo May 6 '11 at 9:05
2  
@slomojo: that's less of a mathematical issue and more of an artistic one. If you're familiar with Escher's work you know that the unit shape can be designed more or less arbitrarily. Just start with a triangle or a hexagon and perturb the sides in a way that keeps all the pieces fitting (that is, if you add a bulge to one side, you have to remove a bulge from the opposite side, and so forth). –  Qiaochu Yuan May 6 '11 at 14:35
    
Sorry, I should've been more clear there, I didn't mean how do I build a unit shape in general, I meant the shape I'm using, consider the second image. –  Slomojo May 7 '11 at 7:38
    
@slomojo: well, the shape is basically a hexagon, but with some bulges carefully added and removed. All of the relevant angles are multiples of $60^{\circ}$, so writing down equations for all the relevant lines (if that's the kind of thing you want to do) is a reasonably straightforward exercise in Euclidean geometry. –  Qiaochu Yuan May 7 '11 at 8:25

In addition to some of the "technical" issues involved in making a particular design (treated above) there is also the issue of the difference between symmetry of a pattern when the colors are disregarded and the symmetry of the pattern that includes the colors. In addition to the book: Symmetry of Things, which does treat color symmetry, another book that treats color symmetry is Tilings and Patterns by Branko Grünbaum and Geoffrey Shephard (W.H. Freeman), 1987.

share|improve this answer

I recommend reading "Symmetry" by Hermann Weyl. He first discusses the history of symmetry and then classifies the point symmetry groups, the frieze groups and finally the wallpaper groups. Note that spherical tilings are just as interesting (and as storied) as Euclidean tilings. Hyperbolic tilings are more recent -- they are a less fundamental yet somewhat deeper subject.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.