Mathematics Stack Exchange is a question and answer site for people studying math at any level and professionals in related fields. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Is there a proof that the ratio of a circle's diameter and the circumference is the same for all circles, that doesn't involve some kind of limiting process, e.g. a direct geometrical proof?

share|cite|improve this question
Sounds hard; its being transcendental seems to preclude the existence of a proof that won't appeal to the concept of limits. – J. M. Aug 24 '10 at 13:51
@Chris, the problem is with defining the length of a circle without appealing to a limit! – Mariano Suárez-Alvarez Aug 24 '10 at 13:54
If you are going to work 'intuitively', then it is pretty obvious that zooming in or out does not change proportions of lengths, so in particular it does change the proportion between the circumference and the diameter! Now, if you want to actually prove something, you need to define things precisely, and you are more or less stuck with limits. – Mariano Suárez-Alvarez Aug 24 '10 at 14:20
@Chris, what I am asking is: since the length of the circumference is defined in terms of limits, there is no possible way to prove anything about it without invoking limits. If what you want to know is if one can define the length of the circumference without using limits, then your question should ask that :) – Mariano Suárez-Alvarez Aug 24 '10 at 15:19
My answer does not depend on any notion of approximation (except to help connect it to other better-known explanations that do involve approximation, that is, convergence of the sequences). Pi as conventionally defined using limits is a limit of something and my answer was that the something, which you can call a "sequence of approximants" or by any other name, is the same for any two circles. Accordingly, whatever "limits" are and whenever they exist, they would be the same for the two circles. Equality of two limits is easier to prove than existence or evaluation of either one alone. – T.. Aug 24 '10 at 19:51

Limits are not involved in the problem of proving that $\pi(C)$ is independent of the circle $C$.

In geometrical definitions of $\pi$, to a circle $C$ is associated a sequence of finite polygonal objects and thus a sequence of numbers (or lengths, or areas, or ratios of those) $\pi_k(C)$. This sequence is thought of as a set of approximations converging to $\pi$, but that doesn't concern us here; what is important is that the sequence is independent of the circle C. Any further aspects of the sequence such as its limit or the rate of convergence will also be the same for any two circles.

(edit: an example of a "geometrical definition" of a sequence of approximants $\pi_k(C)$ is: perimeter of a regular $k$-sided polygon inscribed in circle C, divided by the diameter of C. Also, the use of words like limit and approximation above does not reflect any assumption that the sequences have limits or that an environment involving limits has been set up. We are demonstrating that if $\pi(C)$ is defined using some construction on the sequence, then whether that construction involves limits or not, it must produce the same answer for any two circles.)

The proof that $\pi_k(C_1) = \pi_k(C_2)$ of course would just apply the similarity of polygons and the behavior of length and area with respect to changes of scale. This argument does not assume a limit-based theory of length and area, because the theory of length and area for polygons in Euclidean geometry only requires dissections and rigid motions ("cut-and-paste equivalence" or equidecomposability). Any polygonal arc or region can be standardized to an interval or square by a finite number of (area and length preserving) cut-and-paste dissections. Numerical calculations involving the $\pi_k$, such as ratios of particular lengths or areas, can be understood either as applying to equidecomposability classes of polygons, or to the standardizations. In both interpretations, due to the similitude, the results will be the same for $C_1$ and $C_2$.

(You might think that this is proving a different conclusion, that the equidecomposability version of $\pi$ for the two circles is equal, and not the numerical equality of $\pi$ within a theory that has real numbers as lengths and areas for arbitrary curved figures. However, any real number-based theory, including elementary calculus, Jordan measure, and Lebesgue measure, is set up with a minimum requirement of compatibility with the geometric operations of dissection and rigid motion, so once equidecomposability is known, numerical equality will also follow.)

share|cite|improve this answer
If we say (for example) that $\pi(C)$ is the Cauchy sequence ($\pi_k(C)$), that does not use limits, and the proof of the equation $\pi(C_1) = \pi(C_2)$ also does not use limits. A proof is limit-free if it has no epsilon-delta arguments, $O()$ notation, or other arguments about asymptotic equality-in-the-limit (do you agree?). This is avoided for the question of $\pi$ being circle-independent, because there one has exact, term by term, non-asymptotic equality of the sequences. – T.. Aug 25 '10 at 18:25
To me, this proof is a typical proof which uses limits and avoids the mere use of the words “limits” or “converge.” I would say that you prove some property about Cauchy sequences converging to π(C_1) and π(C_2), but even if you avoid the word “converging” by saying that the Cauchy sequence is the very definition of the real number, a proof working on the defining Cauchy sequences sounds like a proof using limits to me. – Tsuyoshi Ito Aug 26 '10 at 13:55
@Tsuyoshi: in the Cauchy (convergent sequence) model of real numbers, the numbers are sequences, and some proofs of equality can be performed directly on the sequences (even for transcendental numbers, such as the statement "$e - e = 0$") without using limits. This is the case for Pi(C_1) = Pi(C_2). Limits would be involved in proving that those Pi sequences are convergent, but here we are only claiming that whatever "limits" and "convergence" are, any statements involving those concepts that hold for one circle are true for any other, i.e., Pi (under any one definition) is well-defined. – T.. Aug 26 '10 at 16:48
It should be emphasized that not using limits is a well-defined technical concept, not a matter of personal feeling or whether words like "convergence" are used. If the proof does not contain statements with quantifier structure All-Exists-All (such as "for all (Epsilon>0), there exists (N), such that for all (m > N)") then it unequivocally does not use limits. This is the case for proving the equality of the Pi-related sequences associated to two circles, or other purely formal statements like e=e, or equalities between power series that work coefficient by coefficient. – T.. Aug 26 '10 at 16:56
I do not interpret “not using limits” that way, but you can do so if you want to. – Tsuyoshi Ito Aug 27 '10 at 12:07

It seems -as far as I can understand what he was doing- that even Euclid used some sort of limiting process (the principle of exhaustion): . What Euclid is proving here is the following: let $d_1$, $d_2$ be the diameters of two circles and $A_1$, $A_2$ their areas. Then

$$ \frac{A_1} {A_2} = \frac{d_1^2}{d_2^2} \ . $$

Which is the same as saying that the proportion between the area of a circle and the square of its radius is constant: if $r_1$ and $r_2$ are the radii of our circles

$$ \frac{A_1}{d_1^2} = \frac{A_2}{d_2^2} \quad \Longleftrightarrow \quad \frac{A_1}{r_1^2} = \frac{A_2}{r_2^2} $$

That is to say, "$\pi$ is constant".

share|cite|improve this answer
Doesn't the premise $A_1/A_2=d_1^2/d_2^2$ already imply the result? – Ovi Apr 27 at 23:38

Intuitively, all circles are similar and therefore doubling the diameter also doubles the circumference. The same applies to ratios other than 2.

To make this rigorous, we have to consider what we mean by “the length of the circumference.” The usual rigorous definition uses integration and therefore relies on the notion of limits. I guess that any rigorous definition of the length of a curve ultimately requires the notion of limits.

Edit: Rephrased a little to make the connection between the two paragraphs clearer.

share|cite|improve this answer
Of course, this does not explain why (in Euclidean space) doubling the radius also doubles the circumference. But as you note, any answer will have to describe how the circumference is defined in the first place, and probably as a limit, in which case the standard limit arguments will do. – Niel de Beaudrap Aug 24 '10 at 13:58
@Tsuyhoshi: I agree that the core concept is "similarity": but the very fact that similarity is a pertinent concept could be said to be a property of Euclidean space. Or is "similarity" a similarly-useful concept in spherical or hyperbolic geometry? – Niel de Beaudrap Aug 24 '10 at 14:17
@Tsuyoshi: (1) The usual rigorous definition of length of a curve is not as an integral, but as the supremum (least upper bound) of the lengths of finite inscribed polygonal arcs. This does not assume differentiability or a curve in Euclidean space. For smooth enough curves in Euclidean space (or in a Riemannian manifold) it is true that this equals the integral. (2) From the definition it follows, rigorously and without limits (using only the scaling of lengths of the finite polygons) that doubling the size of a circle doubles its length, and the same for any other curve. – T.. Sep 1 '10 at 6:30
@T..: As for (1), I did not know that. Thanks. Taking supremum is arguably a more basic operation than taking limit, but I would argue that considering an infinite set whose supremum defines π to deduce something about π counts as a “kind of limiting process.” As for (2), as you can imagine, I would argue that the proof uses the notion of supremum (which is a limiting process). – Tsuyoshi Ito Sep 1 '10 at 11:17
@T..: As I indicated in a comment to you answer (which I posted in response to your question), both of us already clarified the difference of opinion about what counts as a “proof without limits,” and I do not find it fruitful for either of us to try to convert the other. – Tsuyoshi Ito Sep 1 '10 at 11:18

I came across this proof once, though I'm not 100% sure that writing pi in terms of the tan of a given angle isn't circular.

share|cite|improve this answer
It can be made not to be circular at all, in the book "Intermediate Real Analysis" by Fischer, it is shown that the value $\pi_1$ from circle and geometry and the value that makes the definition $sin x$ with infinite series ( without any reference to circle ) , coincide ( of course only under Euclidean Geometry). Questioning your own answer is a good sign of willingness to progress +1 – Arjang Feb 9 '13 at 2:57

The idea is this:

Similar polygons inscribed in circles have areas that are proportional to the squares of the diameters of the circles. By approximating circles closely by similar polygons of more and more sides, the proportion is carried over to the circle as a limit.

This is the way that it was proved by Euclid.

share|cite|improve this answer

One should learn that the ratios of distances in any geometric figure remain constant if the shape remains constant, despite changes in the size. Similarly the ratios of areas are as the squares of the ratios of distances, so that, for example, $$ \text{area enclosed by a circle} = \text{constant}\times\text{radius }^2, $$ and "constant" means not depending on the size. And $$ \text{area enclosed by a sphere} = \text{constant}\times\text{radius }^3, $$ and again "constant" means not depending on the size (this time the "constant" is $4\pi/3$, as Archimedes showed).

Likewise $$ \text{area enclosed by a pentagon} = \text{constant}\times\text{length of diagonal }^2 $$ and with a bit of work one could evaluate the constant. In every case, finding the constant may (or may not) take a lot of work.

How does one demonstrate this general proposition? Maybe I'll say someting about that on another occasion.

share|cite|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.