Take the 2-minute tour ×
Mathematics Stack Exchange is a question and answer site for people studying math at any level and professionals in related fields. It's 100% free, no registration required.

I'm trying to find the volume of a given shape: $$ V= \begin{cases} \sqrt{x}+\sqrt{y}+\sqrt{z} \leq 1\\x\geq 0,\ y\geq 0,\ z\geq0\end{cases} $$ using double integral. Unfortunately I don't know how to start, namely: $$ z = (1 - \sqrt{y} - \sqrt{x})^{2} $$ and now what should I do? Wolfram can't even plot this function, I'm unable to imagine how it looks like...

Would it be simpler with a triple integral?

share|improve this question
    
It will look like a wonky eighth of a sphere. If we were looking at $x^2+y^2+z^2=1$, then it would be the sphere, however this will look like a strange spiky sphere. Suggestion: Try using the divergence theorem. This will allow you to write the volume as a double integral. With $F=x\boldsymbol{i}+y\boldsymbol{j}+z\boldsymbol{k}$, we have that $\nabla\cdot F=3$, and so $$\iiint_{V}\nabla\cdot FdV=3V.$$ By the divergence theorem, we also have that this equals $$\iint_{S}F\cdot n dS.$$ Unfortunately, I think this last integral is more difficult to evaluate than the triple integral. –  Eric Naslund Dec 18 '12 at 18:29
    
Have you tried change of variables? –  23rd Dec 18 '12 at 19:07
add comment

6 Answers

The transformation $$\phi:\quad (u,v,w)\mapsto(x,y,z):=(u^2,v^2,w^2)$$ maps the simplex $$S:=\{(u,v,w)\ |\ u\geq0,\ v\geq 0,\ w\geq 0,\ u+v+w\leq1\}$$ one-one onto your body $V$, and the Jacobian of $\phi$ computes to $$J_\phi(u,v,w)=8uvw\geq0\ .$$ It follows that volume of $V$ is given by $$\eqalign{{\rm vol}(V)&=\int_S 1\ J_\phi(u,v,w)\ {\rm d}(u,v,w)\cr&=\int_0^1 \int_0^{1-u}\int _0^{1-u-v} 8uvw\ dw\ dv\ du\cr &= \int_0^1\int_0^{1-u} 4u v(1-u-v)^2\ dv\ du\cr &=\ldots= {1\over90}\ .\cr}$$

share|improve this answer
1  
+1: Nice, Christian. I imagine that's how the general formula for the volume of a superellipsoid is obtained. –  Mike Spivey Dec 18 '12 at 20:02
    
+1: I had just made that substitution in an EDIT to my answer, and then saw your answer here. –  coffeemath Dec 18 '12 at 20:43
add comment

For fun, here's a generalization. The shape of the region is the part of a superellipsoid that resides in the first octant. A superellipsoid is (obviously, I suppose) a generalization of an ellipsoid, which in turn is the 3D version of an ellipse.

A superellipsoid satisfies the inequality $$\left(\left|\frac{x}{A}\right|^r +\left|\frac{y}{B}\right|^r\right)^{t/r} + \left|\frac{z}{C}\right|^t \leq 1.$$

The volume of a superellipsoid is (according to the Wikipedia page) $$V = \frac{2}{3} ABC \frac{4}{rt} \frac{\Gamma(1/r)^2 \Gamma(2/t) \Gamma(1/t)}{\Gamma(2/r) \Gamma(3/t)},$$ where $\Gamma(x)$ is the gamma function.

Since we just want the volume in the first octant, we need to divide this by $8$. For the OP's question, we have $r = t = 1/2$ and $A = B = C = 1$. Also, $\Gamma(n) = (n-1)!$ for integers $n \geq 1$.

Thus the required volume is $$\begin{align} V &= \frac{1}{8} \frac{2}{3} \frac{4}{(1/2)(1/2)} \frac{6}{(6) (120)} \\ &= \frac{4}{360} \\ &= \frac{1}{90}. \end{align}$$

share|improve this answer
2  
Very cool, Mike! –  JohnD Dec 18 '12 at 19:44
1  
@JohnD: Thanks! The figured the OP's equation was too nice not to have a name. It took me a while to track it down. –  Mike Spivey Dec 18 '12 at 19:47
add comment

The volume can be calculated as $$\int_0^1 \int_0^{(1-\sqrt{x})^2} (1-\sqrt{x}-\sqrt{y})^2 dy dx.$$ Maple was able to find the inner integral (function of $x$), but unable to finish the evaluation by integrating that from 0 to 1. However a numeric approximation gave $0.011111111...$ which looks like it is $1/90$.

EDIT: If the substitutions $x=r^2, y=s^2, z=t^2$ are made, noting that $dx=2r \ dr$, $dy=2s\ ds$, and $dz=2t\ dt$, the volume element in the $r,s,t$ sysztem is $8rst\ dt \ ds \ dr$, and the volume becomes $$\int_0^1 \int_0^{1-r} \int_0^{1-r-s}8rst\ dt\ ds\ dr=\frac{1}{90},$$ where the integration in the $r,s,t$ system is not complicated by squareroots.

Christian Blatter did exactly this substitution in his answer, and I just noticed that after doing the above edit.

share|improve this answer
1  
Mathematica evaluates same double integral exactly as $1/90$. –  Mike Spivey Dec 18 '12 at 19:11
    
Mike: I have only an old version of maple -- maybe maple has improved since. Thanks for the exact answer, as I was only fairly sure of 1/90 to so many decimals. –  coffeemath Dec 18 '12 at 19:43
add comment

I'm not sure if you need help setting up the double integral or not, but here's the solid as well as the integral and answer for the volume:

Mathematica graphics

share|improve this answer
    
Thank You, what program do You use for that? –  Peter Kowalski Dec 18 '12 at 19:30
    
Mathematica. It has a built in function to plot solutions of systems of inequalities like this. –  JohnD Dec 18 '12 at 19:35
add comment

Wolfram can plot this and do the nessesary integrals.

The indefinite double integral of the z value with respect to $x$ and $y$ is:

$V = c_1+y*c_2+4/9*x^{3/2}*(2*y^.5-3)y+y*x^2/2+xy(3y-8y^.5+6)/6$

The first integral with respect to x and boundary condition 0 to $(1-2y^.5+y)$ is:

$1/6 (-1+\sqrt{y})^3 (-9+8 \sqrt{(-1+\sqrt{y})^2}+9 \sqrt{y})$

Integrating that from $y = 0$ to $1$ is: $1/90$

share|improve this answer
add comment

by using curve expert program this is an approximation formula in the first quadrant:

v=A*B*C*(a*b+c*n^d)/(b+n^d)

for n={.3,....,1}

a=-7.996*10^-4

b=9.2*10^-1

c=3.198*10^-1

d=4.7

for n={1,....,100}

a=-1.77*10^-1

b=2.43

c=1

d=1.83

so for n = .5 ,volume approximated =0.012

share|improve this answer
    
Does this address the question....? The exact volume ($1/90$) was given by earlier respondents. :) –  user86418 Mar 6 at 13:12
    
The question was not about the eigth of a sphere. –  flonk Mar 6 at 13:41
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.