Take the 2-minute tour ×
Mathematics Stack Exchange is a question and answer site for people studying math at any level and professionals in related fields. It's 100% free, no registration required.

When I was at school and learning integration in maths class at A Level my teacher wrote things like this on the board.

$$\int f(x)\, dx$$

When he came to explain the meaning of the $dx$, he told us "think of it as a full stop". For whatever reason I did not raise my hand and question him about it. But I have always shook my head at such a poor explanation for putting a $dx$ at the end of integration equations such as these. To this day I do not know the purpose of the $dx$. Can someone explain this to me without resorting to grammatical metaphors?

share|improve this question
This question is somewhat related and may be useful to you: math.stackexchange.com/questions/21199/is-dy-dx-not-a-ratio –  Dane Sep 21 '12 at 17:51
Much of the math curriculum is designed for people who want to understand math, rather than for people whom one should be trying to seduce into understanding math. That's one of the reasons the teaching methods sometimes don't work well. –  Michael Hardy Sep 21 '12 at 18:03
Well, it's a full stop. –  artistoex Sep 22 '12 at 0:57
@Sachin, I sympathize. We need to put a "full stop" to this kind of teaching. –  user72694 Apr 9 at 9:14
add comment

11 Answers

up vote 41 down vote accepted

The motivation behind integration is to find the area under a curve. You do this, schematically, by breaking up the interval $[a, b]$ into little regions of width $\Delta x$ and adding up the areas of the resulting rectangles. Here's an illustration from Wikipedia:

Riemann sum illustration

Then we want to make an identification along the lines of

$$\sum_x f(x)\Delta x\approx\int_a^b f(x)\,dx,$$

where we take those rectangle widths to be vanishingly small and refer to them as $dx$.

share|improve this answer
The symbol used for integration, $\int$, is in fact just a stylized "S" for "sum"; The classical definition of the definite integral is $\int_a^b f(x) dx = \lim_{\Delta x \to 0} \sum_{x=a}^{b} f(x)\Delta x$; the limit of the Riemann sum of f(x) between a and b as the increment of X approaches zero (and thus the number of rectangles approaches infinity). –  KeithS Sep 21 '12 at 19:14
$dx$ is the differential of the function $x$ which behaves $dy = \frac{dy}{dx}dx$ under a change of coordinate. –  Makoto Kato Sep 21 '12 at 20:46
This is a good explanation of the origin of the notation, but it doesn't quite explain why we bother to write it down. A big part of what the dx notation does is telling you the variable you're integrating over, and as a bonus parenthesizing the integrand. (The latter is probably why the teacher made the 'full stop' remark.) –  Joren Sep 21 '12 at 21:03
I agree with @Joren that one of the most important parts is that it's telling you where you're taking those deltas from, in the case of dx, with respect to x. –  ernie Sep 21 '12 at 21:27
Motivation for finite integration is area. I suggest editing the question since integration is very useful for anti-derivative which also there the dx indicates that we are integrating over x –  raam86 Sep 21 '12 at 22:51
show 1 more comment

There are multiple ways of explaing what the $dx$ means.

  • Practical explanation: It says we are integrating over variable $x$. If we were to integrate over variable $t$, we would write $dt$ instead, and so on.

  • Infinitesimal explanation: We can think of an integral as the limit of a sum: The area under the graph of a (positive) function $f$ can be approximated by the sum $\sum_x f(x) \Delta x$, and in the limit, we make $\Delta x$ arbitrarily small and call it $dx$ (an "infinitesimal" quantity). Jonathan's answer explain that in detail.

  • Advanced explanation: In vector analysis, $dx$ takes meaning as a differential form (roughly, something that behaves like an infinitesimaly small piece of a curve).

share|improve this answer
Quite a good explanation –  Barranka Sep 21 '12 at 21:22
Great answer. The second point is probably the most helpful to the OP, but the first and last are IMO just as good/important: differential forms are what really gives meaning to integrals for the general case (not necessarily just over intervals), and for the simple examples the part of bringing $x$ into scope is a very important conceptual thing. –  leftaroundabout Sep 23 '12 at 17:03
However, isn't there another advanced meaning and that's that in the real analysis theory of Lebesgue integration, $dx$ is what's called a "measure", specifically the Lebesgue measure? The measure version is necessary when dealing with discontinuous functions. –  mike4ty4 2 hours ago
add comment

Leibniz, who introduced this notation in the 17th century, thought of $dx$ as an infinitely small increment of $x$, and at least as a heuristic, that is an immensely useful idea.

However, note some other points:

  • $\displaystyle\int f(x,y)\,dx$ differs from $\displaystyle\int f(x,y)\,dy$. In one case, one integrates a function of $x$, and $y$ is constant; in the other these roles are reversed and one might be integrating a very different function.
  • If $f(x)$ is in meters per second and $dx$ is in seconds, then $f(x)\,dx$ is in meters, and so is the integral. These things should be dimensionally correct, and are not so without the "$dx$".
  • Sometimes one has a dot-product or a cross-product or a matrix product or some other sort of product between $f(x)$ and $dx$. How would one specify that without the "$dx$" written there?
  • When doing substitutions, it becomes important to distinguish between $dx$ and $du$, etc.
share|improve this answer
I like the dimensional analysis point you make here. –  acjay Sep 22 '12 at 6:58
What do you mean by dimensionally correct? –  Sachin Kainth Oct 30 '12 at 17:19
"Dimensionally correct" is a term used in physics. It means everything's measured in the right units. For example, suppose you know that an ampere is a coulomb per second and a volt is a joule per coulomb, and a watt is a joule per second. Then $\mathrm{volt}\cdot\mathrm{amp}=\mathrm{watt}$ because the coulombs cancel. Or $\mathrm{second}\cdot\dfrac{\mathrm{meter}}{\mathrm{second}} = \mathrm{meter}$. Or $\dfrac{\$6}{\$2}= 3$ (with no "$\$$") and $\dfrac{\$6}{2}=\$3$ (with "$\$$"). –  Michael Hardy Oct 30 '12 at 19:42
add comment

The $dx$ can be given various concrete meanings, none of which one can sensibly explain to someone first learning about integrals. It is, in reality, just a notation which comes to use from the originators of calculus, motivated by the ideas behind Jonathan's answer.

Today, the $dx$ serves the purpose of delimiting the integrand (although the physicists, rebellious as ever, like to write $\int\mathrm d xf(x)$ for what we write $\int f(x)\mathrm dx$...) and of making explicit the variable respect to which we are computing the integral (this s useful in situations like $\int f(x,y)\mathrm dx$, which is usually different from $\int f(x,y)\mathrm d y$)

As for concrete mathematical meanings: the $\mathrm dx$ can mean concretely all sort of things: the Lebesgue measure, a differential form, a density, and a few others. It would be impossible to explain what any of these mean to a student first encountering integrals!

share|improve this answer
It is quite common, too, to write simply $\int f(x)$, by the way: this is possible only when this does not introduce any ambiguities (and unless the integrand is an actual formula, it is much better to write $\int f$...) –  Mariano Suárez-Alvarez Sep 21 '12 at 17:52
An advantage of the notation $\int f(x)\mathrm dx$ is that it can be read out quite directly as «the integral of $f$ with respect to $x$», without having to add much. –  Mariano Suárez-Alvarez Sep 21 '12 at 17:53
Instead of the short version $\int f(x)$ I prefer the even shorter version $\int f$, where I don't have any "dangling" $x$. –  Hendrik Vogt Sep 22 '12 at 8:00
The advantage of writing $\mathrm dx$ at the beginning is that for nested integrals with limits, it's more easily seen which limits belong to which variable, compare $\int_1^2\mathrm dx\int_3^4\mathrm dy\,f(x^2+g(x,y))h(x+y-3)$ with $\int_1^2\int_3^4 f(x^2+g(x,y))h(x+y-3)\,\mathrm dy\,\mathrm dx$ –  celtschk Sep 22 '12 at 9:48
Playing loose with the use of $dx$ as bracket is not exclusive to physics: who hasn't written something like $\int \frac{dx}{x}$ before? –  Erick Wong Sep 25 '12 at 18:35
show 1 more comment

Can someone explain this to me without resorting to grammatical metaphors?

It is a matter of grammar. The indefinite integral expression is a large expression organizing several pieces of information:

$$ \color{blue}\int \color{red}{\underline{\quad}} \color{green}d \color{purple}{\underline{\quad}} $$

The blue $\int$ is a symbol expressing that this is an integral expression. The rest of the expression is the integrand.

The integrand consists of three components: there is the green $d$ symbol. There is the purple slot in which you place the name of the variable that you are integrating with respect to, and there is the red slot in which you place the function expression you intend to integrate (with respect to the dummy variable).

There are other grammatical interpretations of integral expressions -- most importantly (IMO) the notion of a "differential form" -- but this is the one you are using in your introductory calculus class.

This particular grammatical form has some symbolism. It is a useful heuristic to think of a "$dx$" as a miniature variation in a function. You can extend this heuristic by imagining the integral to be "adding" up all of these miniature variations. The symbol $\int$, I believe, originated as an elongated $S$, for "sum"; not dissimilar to the choice of sigma ($\Sigma$) for summation expressions.

The notion of differential form is a very useful one you may be interested in learning more about. Unfortunately, I am not aware of any exposition that introduces it as applied to introductory calculus: it's usually only really introduced in a differential geometry course.

share|improve this answer
I don't agree that it's only grammar. Mathematicians' understanding of this has degenerated to the point where many of them think that's all it is. (See my answer posted here.) –  Michael Hardy Sep 21 '12 at 17:51
@Michael: that is what it (overtly) is in elementary calculus. I really do believe differential form-like notation is a much better way to interpret it, but actually introducing the topic would be a far more ambitious answer. I do find it interesting that you object to me saying it's grammar, but your three bullet points are mostly issues of syntax... your third point especially. –  Hurkyl Sep 21 '12 at 17:58
Definitely I would not introduce differential forms in first-year calculus. My first bullet point perhaps could be called "grammar". My point about dimensional correctness is not just grammar. Nor do I agree that my third point is "grammar". –  Michael Hardy Sep 21 '12 at 18:01
@MichaelHardy: When I first studied calculus in university I found it incredibly confusing that people just talked about $\mathrm{d}x$ as if it was some kind of object or variable you can use in normal calculations. Especially the physicists did that when using the total derivative. It really makes no sense until you define every single operation correctly and no introductory textbook that I know of does this. So, for freshmen, the grammar explanation may help to avoid frustration (it did for me). –  Gregor Bruns Sep 21 '12 at 18:08
But one need not follow the textbook in all details. –  Michael Hardy Sep 21 '12 at 18:15
show 2 more comments

Historically, calculus was framed in terms of infinitesimally small numbers. The Leibniz notation dy/dx was originally intended to mean, literally, the division of two infinitesimals. The Leibniz notation $\int f dx$ was meant to indicate a sum of infinitely many rectangles, each with infinitesimal width dx. (The integral sign $\int$ is an "S" for "sum.") Note that the factor $dx$ in the integral is needed in order to make the units come out right. For example, if you're calculating mechanical work as $W=\int F dx$, the units wouldn't be newton-meters if you didn't have the factor of $dx$, which has units of meters.

In the 19th century, mathematicians got uneasy about infinitesimals. They were afraid that a system of mathematics based on infinitesimals could not be developed in a fully rigorous and consistent way. Therefore, they rebuilt the foundations of calculus using limits, but they kept the Leibniz notation, which is extremely useful and practical. In this approach, $W=\int F dx$ stands for a limit of Riemann sums of rectangles with finite widths $\Delta x$, and the $dx$ becomes an archaism.

Around 1960, Abraham Robinson showed that it was possible to have calculus built on a foundation of infinitesimals, and that no inconsistency would result (unless there was an inconsistency that would also affect the real number system itself, which nobody thinks is the case). Therefore it's legitimate to think of integrals and derivatives in essentially the same way that Newton and Leibniz originally conceived of them -- in fact, scientists and engineers never actually stopped thinking about them that way.

share|improve this answer
It is legitimate to think that provided one knows how to do it properly —which most people do not! –  Mariano Suárez-Alvarez Sep 21 '12 at 17:54
@MarianoSuárez-Alvarez: All professional scientists and engineers know how to do it properly. They just don't know how to justify their practices in terms of NSA, or how to systematize their practices in detail. They have a set of techniques for manipulating infinitesimals. These techniques worked for Leibniz and Euler, and have worked for everyone since then, and that practitioners never stopped using. –  Ben Crowell Sep 21 '12 at 20:20
Well, I have certainly seen people make mistakes —specially people who are just stating with calculus (which is the context of the OP, as one should not forget) In any case, that Robinson managed to formalize is completely orthogonal to the fact that all those people you mention do manage to work successfully...: they could probably not care less for that formalization and would probably not be able to understand it anyways. –  Mariano Suárez-Alvarez Sep 21 '12 at 21:34
@MarianoSuárez-Alvarez: "they could probably not care less for that formalization and would probably not be able to understand it anyways." There is nothing that difficult or esoteric about NSA. Keisler did a very nice freshman calc book using it: math.wisc.edu/~keisler/calc.html –  Ben Crowell Sep 22 '12 at 0:08
I know it can be done. The majority of those "professional scientists and engineers" you mentioned, though, have not been exposed to NSA, nor probably want to be! –  Mariano Suárez-Alvarez Sep 22 '12 at 0:14
add comment

I once went at some length illustrating the point that for the purpose of evaluating integrals it is useful to look at $d$ as a linear operator.

share|improve this answer
thanks for -1, any hints on improvement? –  Valentin Oct 4 '12 at 18:02
add comment

Of course for something as simple as $\int{f(x)}dx$, you dont have to write $dx$ if you don't feel like it, and in many situations you are allowed to just write $\int{f}$, although I don't personally make a habit of it.

These things you ask about are not merely some convenient book-keeping device to let us know where the end of the intergral is, they are called differential forms, and you can add and multiply them together.

The algebra of differential forms follow naturally from the simple rule that $dx^2=0$ because this rule actually implies another very important rule, namely that $dx\wedge dy=-dy\wedge dx$, or in other words, that differential forms commute anti-symmetrically, see here for more info.

share|improve this answer
add comment

I did the exact same question to myself and I give you the answer at which I arrived or how I see this.

Ok, let's see. The meaning of $dx$ on $\textit{definite}$ integrals is quite clear (as has been pointed out in other answers), it's the limit when the length element goes to $0$, so when writing $\int_0^1{}x^2dx$ the $dx$ has a clear meaning.

We know that $\textit{indefinite}$ integrals, or the anti-derivatives, can be used via calculus' fundamental theorem to calculate definite integrals, so one could think at this point that we write $dx$ while doing anti-derivatives because of the "closeness" of definite and indefinite integrals and that the $dx$ in $\int{}x^2dx$ does really have no other meaning than full stop.

But that's not the whole story. Truth is that the $dx$ is a "handy" way for changing variables (which is really useful doing integrals).

Imagine you wanna get the anti-derivative of $w(x)$. Since you wanna get the anti-derivative, this function is (you hope) a derivative of some (actually infinite but that is not important now) function, so you wanna integrate


$f(x)$ IS what you wanna get.

Imagine also that you are incompetent enough not to know how to do this. So, in order to solve this you decide you wanna try changing variables, hoping that this will clear the mess and you will be more competent integrating respect to the new variable.

You proceed along this line defining the new variable

$x\equiv{}g(m)$ and $f(x)\equiv{}h(m)$

This is important, if we would be able to get $h(m)$ reversing the variable change we'd get $f(x)$ and the problem would be solved.

So you try out the new variable in hopes of getting $h'(m)$ from $f'(x)$ in hopes of being able to carry out the integration on $h'(m)$


and remembering $m'(x)=\frac{dm}{dx}$ and rearranging terms


And know it is clear why the $dx$ is useful. Multiplying it with $f(x)$ makes the variables "ordered" after variable change and you easily get $h'(m)$ from $f'(x)$ which is what you wanted.

So you see, when doing variable change the $dx$ is something that helps you find the integrand respect to the new variable, and hence, it is written from the beginnig because it is expected that you will have to carry out variable changes and then you will need it.

So summarizing. It actually means full stop or absolutely nothing, but you will (probably) need it so write it and pretend not to see it until you need it.

share|improve this answer
add comment

maybe this can help you

Definition of Integral

share|improve this answer
Plain links don't help... please improve this answer –  Barranka Sep 21 '12 at 21:25
The linked to page has now moved. –  PeteUK May 12 '13 at 0:26
Hi Ayush, the link in your answer doesn't work now. Also it would be good to provide at least some commentary about the link. –  user31782 May 24 at 21:12
Read my latest answer @user31782 –  Ayush Khemka May 26 at 3:27
add comment

An integral gives you the area between the horizontal axis and the curve. Most of the time this is the x axis.


                         |                    |
                       --|--              ----|---- f(x)
                     /   |   \          /     |
                    /    |     --------       |
          |        /     |                    |
     -----|-------       |                    |
          |              |                    |
          |              |                    |
----------|--------------+--------------------|----- x
        a                                   b

And the area enclosed is:

Area = $\int^b_a f(x) dx$

But say you didn't want to use an integral to measure the area between the x axis and the curve. Instead you just caclulate the average value of the graph between a and b and draw a striaght flat line y = avg(x) (the average value of x in that range).

Now you have a graph like this:


                         |                    |
                       - | -              - - | - - f(x)
          |          /   |   \          /     |
     -----|-----------------------------------|---- avg(x)
          |        /     |                    |
     - - -|- - - -       |                    |
          |              |                    |
          |              |                    |
----------|--------------+--------------------|----- x
        a                                   b

And the area enclosed is a rectangle:

Area = avg(x) w where w is the width iof the section

The height is avg(x) and the width is w = b-a or in English, "the width of a slice of the x axis going from a to b."

But say you need a more accurate area. You could break the graph up into smaller sections and make rectangles out of them. Say you make 4 equal sections:


                           |                    |
                      |----|---|        |-------|---- f(x)
                      |    |   |        |       |
                      |    |   |--------|       |
            |         |    |   |        |       |
       -----|---------|    |   |        |       |
            |         |    |   |        |       |
            |         |    |   |        |       |
  ----------|---------|----+---|--------|-------|----- x
            a                                   b

And the area is:

Area = section 1 + section 2 + section 3 + section 4

= avg(x,1) w + avg(x,2) w + avg(x,3) w + avg(x,4) w

where w is the width of each section. The sections are all the same size, so in this case w=(b-a)/4 or in English, "the width of a thin slice of the x axis or 1/4 of the width from a to b."

And if we write this with a sumation we get:

Area = $\sum^4_{n=1}avg(x,n) w$

But it's still not accurate enough. Let's use an infinite number of sections. Now our area becomes a summation of an infinite number of sections. Since it's an infinite sum, we will use the integral sign instead of the summation sign:

Area = $\int avg(x) w$

where avg(x) for an infinitely thin section will be equal to f(x) in that section, and w will be "the width of an infinitely thin section of the x axis."

So instead of avg(x) we can write f(x), because they are the same if the average is taken over an infinitely small width.

And we can rename the w variable to anything we want. The width of a section is the difference between the right side and the left side. The difference between two points is often called the delta of those values. So the difference of two x values (like a and b) would be called delta-x. But that is too long to use in an equation, so when we have an infinitely small delta, it is shortened to dx.

If we replace avg(x) and w with these equivalent things:

Area = $\int f(x) dx$

So what the equation says is:

Area equals the sum of an infinite number of rectangles that are f(x) high and dx wide (where dx is an infinitely small distance).

So you need the dx because otherwise you aren't summing up rectangles and your answer wouldn't be total area.

dx literally means "an infinitely small width of x".

It even means this in derivatives. A derivative of a function is the slope of the graph at that point. Slope is usually measured as the y difference of two points divided by the x difference of those points:

Slope = (y2 - y1) / (x2 - x1)

But the closer these points get the smaller these differences get. Let's start calling them deltas, because the difference between two points is often called the delta of those values.

Slope = delta-y / delta-x

The deltas get smaller and smaller as these two x,y points get closer and closer. When they are an infinitely small distance apart, then the delta-y and delta-x is shortened to dy and dx:

Slope = dy / dx

The slope is still Slope = (y2 - y1) / (x2 - x1) but these points are infinitely close together, so we use dy and dx to tell ourselves that they are infinitely close or "differential distances."

share|improve this answer
Ayush, I appreciate your effort, but! you have used quite informal approach. What you are explaining is definite integral(One should explain both definite and indefinite integral). Honestly speaking you are explaining quite non-rigorously. You have just skipped the explanation of the Limit. "Area equals the sum of an infinite number of rectangles" - A more appropriate(and technically correct) way to say this is: "Total Area equals to the limit of the sum of the areas of $n$ individual rectangles of width $\Delta x$ s.t. $\Delta x\to 0$ and $n \to \infty$" –  user31782 May 26 at 7:34
add comment

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.