# Getting the sequence $\{1, 0, -1, 0, 1, 0, -1, 0, \ldots\}$ without trig?

What's the simplest way to write a function that outputs the sequence:

{1, 0, -1, 0, 1, 0, -1, 0, ...}


... without using any trig functions?

I was able to come up with a very complex sequence involving -1 to some complicated formula, but I was hoping there is a more simple solution.

$n$ should start at 0 and go to infinity.

Update:

All the solutions you guys provided are great! I wasn't aware there were so many of them. I should have mentioned that I prefer a solution which doesn't use recursion; imaginary numbers; matrices; functions with if statements; or functions such as ceil, floor, or mod. I'm looking for something using basic algebra: addition/subtraction, multiplication/division, exponents, etc. However, I will accept anything since I didn't include this clause originally.

This is what I came up with:

$$a_n=\frac{\left(-1\right)^n+1}{2}\cdot \left(-1\right)^{\left(\frac{n}{2}-\frac{\left(-1\right)^{n+1}+1}{4}\right)}$$

Is there a less complicated way (i.e. fewer terms) to get this same sequence?

-
Note that a simple recursion formula isn't possible, but $x_0=1$, $x_1=0$ and $x_{n+2}=-x_n$ works. That's kind of silly, however. –  Thomas Andrews Apr 11 '12 at 19:04
What's wrong with $1,0,-1,0,1,0,-1,0,\dots$? –  Michael Joyce Apr 11 '12 at 19:37
How is "simplest" defined in a non-subjective manner? Fewest operators? Shortest equation? Something else entirely? –  zzzzBov Apr 11 '12 at 20:15
@MichaelJoyce: I need it as a function that I can input into a calculator. –  Senseful Apr 11 '12 at 21:50
Your expression can be simplified to $$a_n=\frac{\left(-1\right)^n+1}{2}\cdot \left(-1\right)^{\frac{n(n-1)}{2}}$$ a factorisation of Mariano Suárez-Alvarez's answer –  Henry Apr 12 '12 at 0:05

Let's try too : $|n \bmod 4-2|-1$

-
Can you tell me what the |'s are? –  user23320 Apr 11 '12 at 20:15
@JoshuaDrake: the absolute value ( in C language it would be abs(x % 4-2)-1 ) –  Raymond Manzoni Apr 11 '12 at 20:17
@JoshuaDrake: note that the formula even works for non integer values (it gives a 'triangle wave'). –  Raymond Manzoni Apr 11 '12 at 20:23
You can see the graph of $f(x) = |x \bmod 4-2|-1$ here: wolframalpha.com/input/?i=y%3D%7C%28x+mod+4%29+-+2%7C+-+1 –  Xenon Apr 11 '12 at 22:13
@Xenon: Thanks for the graph! Let's add another possible solution : $\left(\dfrac {-4}{n+1}\right)$ using the definition of the Kronecker symbol –  Raymond Manzoni Apr 12 '12 at 21:09

Let $a_n$ be defined like the coefficients of the series expansion at $x=0$ for $$\frac1{1-x^2}=1-x^2+x^4-x^6\cdots=\sum\limits_{n=0}^\infty a_n x^n .$$ You'll get your sequence by calculating: $\displaystyle \;\;\;\left[\frac1{n!}\frac{d^n}{dx^n}\frac1{1-x^2}\right]_{x=0}$.

-
Rodrigues-ish. You could also say $a_n=[x^{n}]$ –  Pedro Tamaroff Jul 30 '12 at 21:31
@PeterTamaroff Sorry don't get it. Who's Rodrigues? –  draks ... Jul 30 '12 at 21:45
See this –  Pedro Tamaroff Jul 30 '12 at 21:51
@PeterTamaroff ahh, yeah I like(use) this kind. But what do you mean with $[x^n]$? –  draks ... Jul 30 '12 at 21:57

Here is a solution using only 5 bitwise or arithmetic operations:

2 - (((x + 1) | (x + x)) & 3)

-
Your solution is too complicated. The simplest solution no one has yet posted is mathematical expression n%2. Please see my answer for an explanation how it works. math.stackexchange.com/a/134935/20207 –  bodacydo Apr 21 '12 at 19:43
@bodacydo - your solution is not a solution; it never outputs -1. –  Sam Hocevar Apr 21 '12 at 21:12

With binary operators (not the prettiest solution but probably the fastest):

((n&1)^1) - ((n&2) & ~((n&1)<<1))

-
Probably not the fastest, because there is (((x+3)>>1)&1) - ((x>>1)&1). –  Sam Hocevar Apr 15 '12 at 9:30
I love stuff like this –  Almo Apr 24 '12 at 20:25

What could possibly be easier than $\Re(i^n)$, $n=0,1,\ldots$?

-
totally what I wanted to suggest as well –  Tobias Kienzler Apr 12 '12 at 13:26
+1 nice ${}{}{}{}{}{}$ –  draks ... Feb 8 '13 at 9:24

I think that |n mod 4−2|−1 is a great solution. Here is some that not require absolute value:

(1 - (n mod 4))((n+1) mod 2)

The logic behind it is: n mod 2 gives 0, 1, 0, 1.. because we want all odd numbers to be 0 we use n+1 mod 2. Than we use (1 - (n mod 4)) to make 0 input to output 1 and 2 input to output -1. n mod 4 is just to limit the numbers between 0 and 3.

Cheers.

-
This can be made more symmetrical as $(1 - n\bmod 4)(1 - n \bmod 2)$ –  Peter Taylor Apr 16 '12 at 10:10

I like

function GetNumInSquence(int num)
{
assert(num >= 0);

int m_lookup[4] = { 1, 0, -1, 0 };
int numInSquence = m_lookup[num % 4];
return numInSequence;
}


No ifs or trig or anything; just a simple lookup. It's also easy to read the code. Someone else's 2*!(n % 4) - !(n % 2) is really cool, but it requires explanation to know what it's doing.

-

$$a_n=\frac{(-1)^n+1}{2}(-1)^{\frac{(-1)^n-1}{2}}$$

But, technically that's using imaginary because it is really doing $$a_n=\frac{(-1)^n+1}{2}i^{(-1)^n-1}$$

-
let x = 1
loop forever:
output x
output 0
set x := - x


More simply:

loop forever
output 1, 0, -1, 0


In functional languages, e.g TXR Lisp:

[(repeat '(1 0 -1 0)) 0..20]


Explanation: produce an infinite lazy list formed by repetition of 1 0 -1 0. Then take whatever finite subsequence you want: first 20 elements in this example, from 0 to 19.

No recursion here, no if statements, etc. In the more well-known Clojure, I think the above goes something like this:

(take 20 (repeatedly '(1 0 -1 0)))

-

If you wish to avoid imaginary numbers, you need to ensure that $-1$ takes an integer power: so your answer seems pretty efficient in that respect.

If we relax the condition of avoiding imaginary numbers, then we no longer require integer powers, because we can allow $i = (-1)^{\frac{1}{2}}$ as in several other answers.

Alternatively, if we allow clock arithmetic/modular arithmetic, or rounding with ceiling or floor, it becomes much more straightforward to engineer a discrete, repeating pattern.

Otherwise, I can simplify your answer just a little (require fewer operations):

$$a_n=\frac{\left(-1\right)^n+1}{2}\cdot \left(-1\right)^{\left(\frac{2n-1+\left(-1\right)^{n}}{4}\right)}$$

-
Any expression that uses $(-1)^x$ is trigonometry because $(-1)^x$ is another notation for $\cos(\pi x)+ i \sin (\pi x)$ –  Anixx Apr 11 '12 at 23:41
@Anixx he needs to be able to enter it into a calculator, presumably without trigonometric functions. Most calculators can evaluate exponents, this should be fine. –  itdoesntwork Apr 12 '12 at 13:35

The specific sequence is not essential. You are asking how to construct a function with period 4. Linear combinations of shifts of one $n$-periodic function can be used to write down any other $n$-periodic function, so they are all equally good in that sense. The trouble is to get at a sequence with period 4 without basing it on another one already known to have that period, such as $i^n$.

The answer is division by 2 which, as you can see, appears in all the answers that are not built from a $\mod 4$ operation.

If you are allowed as a primitive one integer function $f(n)$ of period 2, such as $(-1)^n$, and division by 2, then any function of order $2^k$ can be constructed.

From $f(n)$ and possible divisions by 2, one can construct the parity function $p(n) = n \mod 2$. Using that and more divisions by two, one can construct for each $i$ the function that equals the $i$'th binary digit of $n$.

I don't think there is a way to avoid as ingredients in the formula at least one 2-periodic function given as a primitive, and division by 2. Except by providing a 4-periodic operation at the start, in which case linear combinations are enough.

-

$$\frac{1}{2} \left((-1)^{(n-1) n/2}+(-1)^{n (n+1)/2}\right)$$

-
This is trigonometry. –  Anixx Apr 11 '12 at 23:38
@Anixx: Because the exponents are triangular numbers!? :-) –  A. Rex Apr 12 '12 at 1:39
Any expression that uses $(−1)^x$ is trigonometry because $(−1)^x$ is another notation for $\cos(\pi x)+i\sin(\pi x)$. –  Anixx Apr 12 '12 at 3:20
@Anixx $(-1)^n = -1\cdot -1\cdot -1 \cdots (n)$ because here $n\in N$. –  Eelvex Apr 12 '12 at 3:55
@Anixx I was talking about the definition of $(-1)^n$, which is not trigonometric. –  Eelvex Apr 12 '12 at 13:06

If you have a sequence and have a linear recursion formula generating the sequence, then you can easily transform it into a closed form solution using one of many methods available.

In your case let us start with the simplest recursion: $a_0=1,a_1=0,a_n=-a_{n-2},n\ge 2$. The easiest (if you have access to a computer) way to obtain a closed form solution is to use matrix theory.

First, we rewrite the recursion in matrix form: $\left(\matrix{ a_n \\ a_{n-1} }\right)=\left(\matrix{ 0 & -1 \\ 1 & 0 }\right)\left(\matrix{ a_{n-1} \\ a_{n-2} }\right)$.

From here we get: $$\left(\matrix{ a_n \\ a_{n-1} }\right)=\left(\matrix{ 0 & -1 \\ 1 & 0 }\right)^{n-1}\left(\matrix{ a_1 \\ a_0 }\right)=\left(\matrix{ 0 & -1 \\ 1 & 0 }\right)^{n-1}\left(\matrix{ 0 \\ 1 }\right)$$ A standard method to proceed at this point is to diagonalize the matrix (here the computer is your best friend, for example: use Wolfram Alpha): $$\left(\matrix{ 0 & -1 \\ 1 & 0 }\right)=\left(\matrix{ -i & i \\ 1 & 1 }\right)\left(\matrix{ -i & 0 \\ 0 & i }\right)\left(\matrix{ -i & i \\ 1 & 1 }\right)^{-1}$$ $$\left(\matrix{ a_n \\ a_{n-1} }\right)=\left(\matrix{ -i & i \\ 1 & 1 }\right)\left(\matrix{ (-i)^{n-1} & 0 \\ 0 & i^{n-1} }\right)\left(\matrix{ i/2 & 1/2 \\ -i/2 & 1/2 }\right)\left(\matrix{ 0 \\ 1 }\right)$$ and $$a_n=\frac{1}{2}(-i)^n+\frac{1}{2}i^n$$

We could start from another form of recursion: for example, $a_0=1, a_1=0, a_2=-1$ and $a_n=-(a_{n-3}+a_{n-2}+a_{n-1})$, $n\ge 3$. Then write down a 3x3 matrix representing the recursion, diagonalize it, and obtain... well, the same solution. So, it does not matter how you represent the linear recursion: in general, you are going to obtain the same closed form solution.

Another way to find a closed form solution is to use generating functions. Using generating functions is easier to do by hand (no need to diagonalize and invert matrices).

-
Great answer. I hope it is not underrated. –  Pedro Tamaroff Apr 11 '12 at 20:48
+1 very nice... –  draks ... Feb 8 '13 at 9:25

If you like the programming language C, you could write

2*!(n % 4) - !(n % 2)


which works for n from 0 up to the point where n overflows your integer size.

-
If n is an unsigned it'll keep on working past integer overflow, too. –  fluffy Apr 12 '12 at 22:56

My favourite is $(-1)^{\frac{n-1}{2}}(n \text{ mod } 2 )$. Seems quite tidy compared to other possible expressions.

-

This may be silly, but ${(-1)^{\lceil n/2\rceil+1} }\cdot{(-1)^{n+1}+1\over 2}$, where $\lceil m\rceil$ is the smallest integer greater than or equal to $m$.

-

How about $\dfrac{i^n + (-i)^n}{2}$? (Of course, that is arguably just trigonometry in disguise).

Or as a recurrence: $a_n = -a_{n-2}$ with $(a_0,a_1)=(1,0)$.

Or $\begin{bmatrix}1 & 0\end{bmatrix}\begin{bmatrix}0&-1\\1&0\end{bmatrix}^n\begin{bmatrix}1\\0\end{bmatrix}$? (Which can be viewed as a better-disguised version of either of the two previous suggestions).

-
Beat me to it ... –  Mark Bennet Apr 11 '12 at 19:03
The equivalences here are interesting. Note also that the recurrence form is a disguise for the $i^n$ form, and converted to the related homogeneous linear differential equation recreates the trig form. –  Mark Bennet Apr 11 '12 at 19:21
But what if... –  anon Apr 11 '12 at 19:44
@anon +1 That was hilarious and unexpected. That said, if I see more than one meme post a day on this site, I'm flagging 'em. –  Rahul Apr 12 '12 at 0:29
@rahul. Count yourself lucky that you don't frequent scifi.SE, where the mother of all meme sites is occasionally referenced, namely tvtropes.org. Over there, any reference to that site usually contains a SPOILER tag, since going there is essentially equivalent to falling into a black hole, time-waste-wise. –  Rick Decker Jul 31 '12 at 2:10

Whether this is simplest will depend on exactly what you mean, but the following is a pretty simple description. It's certainly simpler than anything involving trig functions.

$$a_n=\begin{cases} 0 & \text{if n is odd} \\ 1 & \text{if n is divisible by 4} \\ -1 & \text{otherwise} \end{cases}$$

-
This is so brutally simple I never ever were able to find it. –  vakufo Apr 13 '12 at 5:31

## protected by anonApr 12 '12 at 19:36

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.